What To Do If My Washing Machine Does Not Spin

 

The door handle of a washing machine is a very fragile part. Therefore, if it has broken or gives you problems and sometimes even does not allow you to open the door to put your clothes in or out, you will want to change the door lock of the top-loading washing machine. And it's very simple.

Although if you don't know how to do it, it may take several hours. Therefore, it is important that you have the right tools and that you follow the steps that we teach you one by one.

Lg Washing Machine Service in Coimbatore

How does a top-load washing machine door latch work?

The door handle of the washing machine can wear out over the years. It is very common for one of its parts to wear out or simply break inside. In fact, its break in most cases is not visible.

In most cases, this break appears after a little struggle with the door and in many cases due to a too-strong pull.

For this reason, it is always recommended that you wait a few minutes to make sure that you can open the door calmly and without incident.

Samsung Washing Machine Service in Coimbatore

Causes of the problem in closing the top-loading washing machine

Replacing the door lock on a top-loading washing machine can be quite tricky if you don't know exactly what caused it or where the problem is.

Sometimes the break is internal and in others, there is a blockage. However, if you can't figure out why, don't worry, there are some steps you can take to fix the shooter issue even if you don't know the problem.


What you need before changing the lock on your washing machine door

But before you start you have to prepare yourself. What do you need to change the door lock of the top-loading washing machine? Not much.

In principle, a screwdriver or wrench (preferably both) and pliers are enough.

All three are cheap and easy-to-acquire tools. Plus you don't need anyone else's help.

But in addition, you probably should buy a spring and a shaft to replace the ones on the inside of your washing machine door.

Whirlpool Washing Machine Service in Coimbatore

Steps to change the top-loading washer door lock

To change the door lock on a top-loading washer, you always have to remove the door. This also applies to front-loading washing machines.

Step 1

First of all, you have to loosen the screws on the door, which are usually small, so you will need a screwdriver for these measurements. Then, slightly lift the door before unscrewing it completely. Then the hinge will come loose.

Step 2

When the hinge is loose you have to loosen the screws on the inside of the door. This is done later because you didn't have access before.

Well, now you can remove the metal or glass part and you can finally completely separate the handle or handle from the door.

bosch Washing Machine Service Centre Coimbatore

Step 3

Now what you have to do is extract the innerspring and its axis. Probably this is the one that has broken its operation.

What you should do is replace them with new ones.

This is very easy but you need to make sure that the smaller tab on the inside fits snugly into the slot. If this were not the case, problems could arise again.

Once you have changed them, return everything to its previous state. That is, you must put the metal or glass part back in its place and also place the interior frame.

Ifb Washing Machine Service in Coimbatore

Then correctly place the lever handle on the frame and of course check that it moves and rotates correctly without forcing. It is also good that you notice that there is dampness.

Step 4

When you have verified that everything works correctly, it is time to screw. Just place the door of your top-loading washing machine in the correct position and start screwing.

The best thing is that you do it with a screwdriver of the appropriate measures.

Siemens Washing Machine Service Centre Coimbatore

Conclusion: how to change the top-loading washing machine door lock in a few minutes

Changing the door lock on your top-loading washer is easy. At most, it will take you 20 minutes. The most important thing is that you have the right tools, that you find replacements for the spring, and finally that you have patience. If you follow the steps you can repair it in less than half an hour.

Comments

Popular posts from this blog

How to Clean and Disinfect the Washing Machine Inside So That the Clothes Remain Spotless

How Long Is the Useful Life of A Washing Machine?

MAINTAINING YOUR WASHING MACHINE